Copying A Parameter Set; Loading The Saved Parameter Sets; Saving All Sets Of Parameters; Switching Over Parameter Sets - Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual

SIMOCRANE CeCOMM commissioning and diagnostic program
8.5 Monitor (tab)
Note
Changes to a TLS parameter (P240 to P336), as described in this section, only refer to the
currently selected parameter set and not to all four parameter sets. This behavior must be
considered, in particular, when parameter set switchover is used.
8.5.3.6

Copying a parameter set

"Y" Copy parameter set
The parameter set that can be edited at this time can be copied to one of the other three current
parameter sets with the "Y" - "Copy parameter set" function. The number of the target
parameter set must be entered.
8.5.3.7

Loading the saved parameter sets

"R" Reload parameters
All saved parameter sets are loaded and the current parameter sets are therefore overwritten
with the parameter sets stored in files "Par0.txt" to "Par3.txt" This is useful when a parameter
has been changed but not saved and the previous version needs to be restored. If a parameter
set is copied into the directory, the parameters must also be reloaded for updating.
The parameters are reloaded automatically upon power up.
8.5.3.8

Saving all sets of parameters

"S" Save all sets of parameters
All current parameter sets are saved in parameter files "Par0.txt" to "Par3.txt" with this function.
Note
Each parameter changed in the active parameter set is effective immediately but is not stored
permanently. Changed parameters should also be permanently saved with Save "S". All
current parameter sets are saved in all cases.
8.5.3.9

Switching over parameter sets

One of the four current parameter sets can be activated via the "PARSET" input value. This
makes it possible to operate the AddOn technology package using different parameter settings.
The parameter P101 "Parameter set locked during travel" can be used to prevent the switching
of parameter sets during travel.
286
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA