Diagnostics - Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual

Sway Control function description
6.13 Target generator
6.13.4

Diagnostics

The supplied program SIMOCRANE CeCOMM can be used to display the status of the target
generator. To be able to access the status display, you will have to set the access code (P100)
in parameter set 1 to the value 3. If a connection to the SIMOTION has already been
established, you can then select the "Monitor" tab in the main menu and press the "Y" key to
activate the status displays. A total of three status displays are available. The first is described
below. The descriptions of the second and third status displays will follow in Chapter Automatic
target specification (Page 201).
The first status display (1/3) for the target generator provides an overview of the saved positions
which are important for operation. The upper section shows the indexes of the target position
list described in Chapter Automatic target specification (Page 201) whose locking state has
been changed. The value -1 indicates that no position has been saved for that particular status.
The saved positions for parking, lashing, waiting and lane positions are also shown.
Figure 6-26
200
Target generator overview monitor
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA