Siemens Sinamics S120 Manual page 189

Article number
Degree of protection
Dimensions
- Width
- Height
- Depth
Frame size
Weight
Recommended fuse
- Number per phase (connected in parallel)
- Rated current
- Frame size acc. to IEC 60269
Minimum short-circuit current
Valid for a 5s duty cycle (overload duration) and a duty cycle duration of 300s based on the rated DC-link current.
1)
Valid for a 5s duty cycle (overload duration) and a duty cycle duration of 300s based on the rated infeed/regenerative
2)
feedback current.
The specified power loss is the maximum value at 100% utilization level. The value in normal operation is lower.
3)
This value applies to the water coolant option; for other coolant types, see Chapter "Cooling circuit and coolant proper-
4)
ties".
When using fuses connected in parallel in each phase, if one fuse ruptures, then all of the fuses must be replaced.
5)
Minimum current required so that protective devices reliably respond and trip.
6)
Liquid-cooled chassis power units
Manual, (GH7), 11/2016, 6SL3097-4AM00-0BP7
6SL3335–
mm
mm
mm
kg
A
A
6)
7TE41–4AA3
IP00
295
1516
545
JXL
220
3NE1448-2
2
5)
850
3
21000
Line Modules
5.3 Active Line Modules
189