Siemens Sinamics S120 Manual page 225

Article number
DC link/motor connection
Max. conductor cross-sections
- DC link connection (DCP, DCN)
- Motor connection (U2, V2, W2)
- PE connection
Max. cable length
Degree of protection
Dimensions
- Width
- Height
- Depth
Frame size
Weight
Recommended fuse acc. to IEC
- Number per phase (connected in parallel)
- Rated current
- Frame size acc. to IEC 60269
Recommended fuse acc. to UL
Type 3NE3
- Number per phase (connected in parallel)
- Rated current
- Frame size acc. to IEC 60269
Type 3NB1/3NB2
- rated current
Rated power of a typical 6-pole standard induction motor based on I
1)
Rated power of a typical 6-pole standard induction motor based on I
2)
The specified power loss is the maximum value at 100% utilization level. The value in normal operation is lower.
3)
This value applies to the water coolant option; for other coolant types, see Chapter "Cooling circuit and coolant proper-
4)
ties".
To achieve a UL-approved system, it is absolutely essential to use the fuse types specified in the table.
5)
When using fuses connected in parallel in each phase, if one fuse ruptures, then all of the fuses must be replaced.
6)
Liquid-cooled chassis power units
Manual, (GH7), 11/2016, 6SL3097-4AM00-0BP7
6SL3325–
mm²
mm²
mm²
m
mm
mm
mm
kg
A
5)
A
A
1TE36-1AA3 1TE37-5AA3
Flat connection for M12 screw
Busbar Busbar
4 x 185 4 x 185
4 x 185 4 x 185
300 (shielded) / 450 (unshielded)
IP00 IP00
265 265
1002 1002
545 545
HXL HXL
110 110
3NE3338-8 3NE3334-0B
1 2
6)
800 500
2 2
3NE3338-8 --
1
800
2
3NB2345- 3NB2350-
4KK16 4KK16
800 1000
or I at 400 V 3AC 50 Hz.
L H
or I at 460 V 3AC 60Hz.
L H
Motor Modules
6.6 Technical specifications
1TE38–4AA3 1TE41-0AA3
Busbar Busbar
4 x 185 Busbar
4 x 185 Busbar
IP00 IP00
265 295
1002 1516
545 545
HXL JXL
110 220
3NE3335 3NE3336
2 2
6) 6)
560 630
2 2
3NE3335 3NE3336
2 2
6) 6)
560 630
2 2
3NB2350- 3NB2355-
4KK16 4KK16
1000 1400
225