Eject And Remove Dvd/Cd From Dvd/Cd Drive; Labeling Removable Media; Formatting Removable Media - GE Vivid i n Service Manual

Hide thumbs Also See for Vivid i n:
Table of Contents

Advertisement

GE H
EALTHCARE
D
FL091021, R
IRECTION
4-2-5-5

Eject and Remove DVD/CD from DVD/CD Drive

Do not eject the DVD/CD using the button on front of the DVD/CD Drive.
NOTICE
In some cases, the DVD/CD media is ejected automatically. If not automatically ejected, use the manual
ejection method as described in the following steps:
1.) Select the Eject button on the screen
OR
Press <Alt> + E on the alphanumeric keyboard to display the Eject Device menu
2.) Select CD-Rewriteable in the Eject Device menu to eject the DVD/CD media.
3.) Remove the ejected DVD/CD media from the drive and place it in its cover box for storage in a safe
place.
4-2-6

Labeling Removable Media

Before you start to format any Removable Media, be sure about what naming convention you will use
for labelling.
Use a logical name and make sure to physically label each Removable Media.
Verify that each Removable Media is given a unique name. Maximum eleven (11) characters may
be used for the label name.
Remember that MO Disks have two sides, Side A and Side B. Each Side must have a unique name.
Example:
MO Disks for storing images may be labeled "IMAGE_1A" (Side A on MO Disk #1), "IMAGE_1B (Side
B on MO Disk #2), "IMAGE_2A"...
4-2-7

Formatting Removable Media

This procedure describes how to format an MO Disk or DVD/CD media.
Before you continue, be sure about what naming convention you will use for labelling the Removable Media.
NOTE:
IMPORTANT: Use only CD-R, DVD-R or DVD+R media from a reputable vendor and only
high-grade media types.
1.) Select Config > Connectivity > Tools.
2.) Select the removable media from the Tools pop-up menu.
3.) Enter a name for the removable media in the Label field.
4.) Press Format.
5.) Wait for display of the Information window, indicating that the formatting process is completed.
Do not eject the DVD/CD using the button on the DVD/CD drive.
NOTICE
6.) Press <Alt> + E on the alphanumeric keyboard to display the Eject Device menu (Figure 4-6 on
page 4-12 )
7.) Select the relevant media.
The selected media is ejected.
5
EVISION
Chapter 4 - General Procedures and Functional Checks
V
S
M
IVID I N
ERVICE
ANUAL
(Figure
4-6).
4-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

H45561acH45551deFl000110Fl000090

Table of Contents