Set The Scanner’s Network Information; Set The Remote Archive’s Network Information - GE Vivid i n Service Manual

GE H
EALTHCARE
D FL091021, R
IRECTION
3-8-3-3 Set the Scanner's Network Information
In the IP settings area of the screen, enter the following:
1.) IP Address for scanner. (Default IP Address from factory: 10.0.0.3).
2.) Subnet Mask for scanner. (Default Subnet Masks from factory: 255.255.255).
3.) IP address for Default Gateway. (Default Gateways from factory IP address: 0.0.0.0).
4.) In addition, the scanner's AE Title must be entered in the DICOM server's setup.
.
AETitle
IP Address
Subnet Mask
Default Gateway
3-8-3-4 Set the Remote Archive's Network Information
In the Remote Archive Setup area of the screen (see example in
1.) Remote Archive IP address. (Default IP Address from factory: 10.0.0.4).
2.) Remote Archive Name. (Default Remote Archive Name from factory: ECHOPAC7-000001).
.
IP Address for the remote archive
Computer Name for the remote
archive
5
EVISION
Figure 3-57 TCP/IP Set-up for Vivid i n
Figure 3-58 TCP/IP Set-up for Vivid i n
Chapter 3 - System Setup
V S
IVID I N ERVICE
Figure 3-58), enter the following:
M
ANUAL
3-71