GE Voluson E8 Service Manual page 106

GE H RAFT
EALTHCARE
D KTD102576, R
IRECTION
3-7-3 Printer Installation manually
13.)Assign a name, decide if printer should be used as default printer and confirm with NEXT.
NOTE: If the "Printer Sharing" window appears, select 'Do not share this printer' and confirm with NEXT.
14.)The "Complete the Add Printer Wizard" window appears on the screen.
15.)Complete the manual Printer Installation with the FINISH button.
NOTE: If the message "The software you are installing for this hardware has not passed Windows ...." appears,
click CONTINUE ANYWAY.
16.)Close all open windows, close the "System Setup" with SAVE & EXIT and restart the system
(turn off and on the system).
NOTICE
After boot up of the system, verify the correct settings in the printer "Properties",
see: Section 3-7-4 "Adjustment of Printer Settings" on page
!! NOTICE:
Afterwards assign the Printer to the remote keys P1, P2, P3 and/or P4,
see: Section 3-7-5 "Remote Control Selection" on page
3-40
7 DRAFT (A
EVISION
Figure 3-38 Assign name
Figure 3-39 Complete manual Printer Installation
Section 3-7 - Printer Installation
23, 2012)
UGUST
(cont'd)
3-41.
3-48.
V E8 / V
OLUSON OLUSON
S M
ERVICE ANUAL
E6