GE Voluson E8 Service Manual page 333

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
8-7-1 Operation for activating Options
(Option is activated for demo and expires
on the date shown in the "Valid" column)
(Option is permanently activated [purchased])
Figure 8-15 System Setup - Administration - OPTIONS page (e.g., Voluson E8 Expert BT13 system)
(Option is activated for demo and expires
on the date shown in the "Valid" column)
(Option is permanently activated [purchased])
Figure 8-16 System Setup - Administration - OPTIONS page (e.g., Voluson E6 BT10 systems)
8-7-1-1 Operation for installing a "Demo Key" or a "Permanent Key":
1.) Position the cursor inside the input field desired and press the
2.) If one exists, clear/edit the current key code.
3.) Enter the encrypted serial code with the keyboard and click on SUBMIT. (Code will be checked.)
4.) Click the SAVE&EXIT button.
NOTE: After activating a key code, restart (turn off and on) the Voluson E8 / Voluson E6 system.
7 DRAFT (A
EVISION
D = Demo
I = Inactive
(Option is not activated)
P = Permanent
D = Demo
I = Inactive
(Option is not activated)
P = Permanent
Chapter 8 - Replacement Procedures
23, 2012)
UGUST
(cont'd)
Permanent Key
Permanent Key
V E8 / V
OLUSON OLUSON
S
ERVICE
right/left trackball key.
E6
M
ANUAL
8-15