GE Voluson E8 Service Manual page 311

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
Memory allocation failed Action: restart system
MessageBox(NULL, err_msg, "CVIE ERROR", MB_OK);
missing BCMCPW_TxFocusData Action: restart the system
missing BM_TxFocusData Action: restart the system
missing CW_TxFocusData Action: restart the system
missing ProbeAcousticUnit, wrong ProbeAcousticUnitID. Action: restart the system
missing ProbeGeneral data - wrong ProbeID. Action: restart the system
missing ProbeScanFunc - wrong ProbeScanFuncID. Action: restart the system
Mode not implemented now
MotionColor-DSC 1st:Memory allocation failed
MotionColor-DSC 2nd:Memory allocation failed
Motion-DSC:Memory allocation failed
No Cassette in drive! Put cassette into drive of VCR.
No CD Writer found
No default settings available - use "Edit Settings" to set the Default Settings!
No disc or device not ready!
No DVD in drive! Put DVD into drive of recorder.
no PCI Interface
No Printer selected!
Not enough space. (Not enough space on destination to hold the backup data.)
overview window creation failed. Action: restart the system
Password contains invalid characters. Allowed characters are A..Z, a..z, 0..9 and .
Password is too short. Minimum 6 characters.
Password must contain at least 2 non-letter characters, 0..9 or
Persistance Out Of Range
Persistence coeff page index too big
pGetActualUnitBuffer failed, RepresentationManager is not initialized
Please plug off and on probe and try again
Please plug off and on probe and try again. Plug it on a different probe connector
pNextUnitCompleted failed, RepresentationManager is not initialized
7 DRAFT (A
EVISION
Error Messages
Chapter 7 - Diagnostics/Troubleshooting
23, 2012)
UGUST
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
Put cassette into the VCR
check the connection and the Power cable - plug the cable
off and on and try again. (restart the system)
select a printer
insert disk, if fails again reboot and try again (with another
disk)
Put DVD into drive
restart the system
select a printer
select another destination to save Full Backup
restart the system
Enter password without invalid characters
Enter password with at least 6 characters
Enter password with minimum 2 non-letter characters
press ok and save this user-setting once again
restart the system
restart the system
plug of and on the probe and try again, plug it on a different
probe connector.
see error message, connect another probe
restart the system
V E8 / V
OLUSON OLUSON
S M
ERVICE ANUAL
Actions
7-39
E6