GE Voluson E8 Service Manual page 170

GE H RAFT
EALTHCARE
D KTD102576, R
IRECTION
4-5-2 Load Image Settings Only / Load Small Backup (Scan Settings)
The loading procedure overwrites existing image/scan settings on the local hard drive.
CAUTION
Make sure to insert the correct System DVD.
!! CAUTION:
Additionally you can load the image settings from D:\usersettings\FactoryDefault\V830
4-5-2-1 Preparations
1.) Insert a DVD/CD+R/RW into the drive or connect an external USB device.
2.) Press the UTILITIES key on the control panel.
3.) Touch SYSTEM SETUP button to invoke the setup desktop.
4.) On the left side of the screen select BACKUP and then click the
5.) Click the LOAD button of the "Image Settings Only" resp. "Small Backup (Scan Settings)" group.
6.) Choose the media and click LOAD.
NOTE: If it is desired to load settings from media Internal HDD, click on the CHANGE FOLDER button, browse
for the folder "D:\usersettings\FactoryDefault\V830" and then click the LOAD button.
Two Settings are available which slightly differ:
-
-
7.) Select the appropriate file and click OK.
8.) Select the desired loading procedure:
-
-
4-34 Section 4-5 - Backup and Restore Database, Preset Configurations and Images
7 DRAFT (A
EVISION
Figure 4-24 Load window
General = for rest of the world
USA = for United States (e.g., image orientation UP/DOWN inverted at transvaginal probes)
Load "Complete Backup"
Load only parts of the "Complete Backup"
23, 2012)
UGUST
on page 4-35
on page 4-36
V E8 / V
OLUSON OLUSON
S
ERVICE
SYSTEM CONFIGURATION tab.
Choose media
and
then click [Load]
E6
M
ANUAL