GE Voluson E8 Service Manual page 264

GE H RAFT
EALTHCARE
D KTD102576, R
IRECTION
6-3-1 Load Default Monitor Settings
1.) Press the UTILITIES key on the control panel.
2.) In the "Utilities" menu touch the MONITOR button to display the "Monitor Menu" on the screen.
3.) Touch the SEMI-DARK ROOM button to load default monitor settings for your system.
MDM90 (BT09)
Dark Semi D
Brightness 122
Contrast 132
Backlight Brightness 0
Sharpness 0
Red 174
Green 194
Blue 255
It is impossible to re-program default monitor settings!
NOTICE
!! NOTICE:
6-3-2 How to readjust Monitor Settings
BT Version: Readjustment of any Monitor Settings is impossible at BT13 (EC200, 13.x.x) systems.
If you are not satisfied with the pre-adjusted factory settings, adjust those you prefer:
• Brightness and Contrast
• Backlight Brightness and Sharpness
• Color Temperature (RGB)
NOTE: All changed values will only be saved by selecting "OK" and "Exit" from the Monitor Menu.
If not, the adjusted values will be lost after loss of power.
6-2
7 DRAFT (A
EVISION
Figure 6-1 Monitor Menu (e.g., BT12)
MDM100 (BT10)
Light Dark Semi D Light
126 130 124 128
136 140 140 143
0 0 48 64
0 0 0 0
174 174 155 155
194 194 194 194
255 255 255 255
Figure 6-2 Default Monitor Settings
on page 6-3
on page 6-4
Section 6-3 - LCD Monitor Adjustment
23, 2012)
UGUST
MDM100 (BT12)
Dark Semi D Light
Fact.A Fact.B Fact.A Fact.B Fact.A Fact.B
132 126 129 128 132 128 134
147 130 115 136 120 143 127
80 16 25 32 40 64
0 0 0 0 0
155 165 167 165 167 165 167
194 190 197 190 197 190 197
255 237 255 237 255 237 255
on page 6-3
V
OLUSON
[Semi-Dark Room]
button
OSD Controls
MDM95 (BT09)
Dark Semi D Light
126 128 132
140 148 148
60 128 192 255
0 0 0 0 0
167 167 167
188 188 188
255 255 255
E8 / V E6
OLUSON
S M
ERVICE ANUAL
Note:
Monitor type
can be found
on back of the
monitor.