CP610 software
Download the SW to Panel (CP610) if it has this option as below.
•
Save the following file to root folder of a USB disk.
•
Switch off the control power.
•
Plug in the USB disk to the HMI device CP610.
•
Switch on the control power.
•
Display the context menu by holding your finger for a few seconds on the screen and
then select Update.
•
The panel system will check for the presence of the program package in the USB disk
root folder and ask for update.
•
Select Auto select best match and click next. The update will start automatically.
•
On the CP610 press an empty area of the screen for a few seconds to display the
context menu.
•
Select "Show system setting", then set the IP address and Subnet mask on edit mode
IP: 192.168.0.11, Subnet mask: 255.255.255.0
Option 107