Ceiling Type - Fujitsu AIRSTAGE J-IIIL Design & Technical Manual

2-10. Ceiling type

Model name
Power supply
Available voltage range
Capacity
Input power
Airflow rate
Fan
Type × Q'ty
Motor output
Sound pressure level*
Heat exchanger type
Air filter
Enclosure
Dimensions
(H × W × D)
Weight
Connection pipe diameter
NOTES:
• Specifications are based on the following conditions:
– Cooling: Indoor temperature of 80 °FDB/67 °FWB (26.7 °CDB/19.4 °CWB), and outdoor temperature of 95 °FDB/75 °FWB (35 °CDB/23.9 °CWB).
– Heating: Indoor temperature of 70 °FDB/60 °FWB (21.1 °CDB/15.6 °CWB), and outdoor temperature of 47 °FDB/43 °FWB (8.3 °CDB/6.1 °CWB).
– Pipe length: 25 ft (7.5 m), Height difference: 0 ft (0 m). (Between outdoor unit and indoor unit.)
• Protective function might work when using it outside the operation range.
• *: Sound pressure level:
– Measured values in manufacturer's anechoic chamber.
– Because of the surrounding sound environment, the sound levels measured in actual installation conditions might be higher than the specified values here.
2-10. Ceiling type
Cooling
Heating
HIGH
MED—HIGH
MED
CFM (m
MED—LOW
LOW
QUIET
HIGH
MED—HIGH
MED
MED—LOW
LOW
QUIET
Length
Fin pitch
Rows × Stages
Face area
Pipe type (Material)
Type (Material)
Fin
Surface treatment
Type
Net material
Material
Color
Net
Gross
Net
Gross
Liquid (Flare)
Gas (Flare)
Drain hose
ABUA30TLAV2
Btu/h 30,000
kW 8.8
Btu/h 34,000
kW 10.0
W 66
960 (1,630)
895 (1,520)
836 (1,420)
3
/h)
777 (1,320)
719 (1,220)
671 (1,140)
W
42
40
39
dB (A)
37
35
33
in (mm)
FPI
3 × 12
2 2
ft (m )
WhiteApproximate color of Munsell N9.25/
9-7/16 × 65-3/8 × 27-9/16 (240 × 1,660 × 700)
in (mm)
12-1/2 × 70-7/8 × 31-1/8 (318 × 1,800 × 790)
101 (46)
lb (kg)
130 (59)
in (mm)
I.D.: Ø 3/4 (19.05); O.D.: Ø 1-1/16 (26.6)
- (04-19) -
ABUA36TLAV2
1 phase ~ 208/230 V 60 Hz
187—253 V
36,000
10.6
40,000
11.7
85
995 (1,690)
919 (1,560)
854 (1,450)
801 (1,360)
748 (1,270)
689 (1,170)
Sirocco × 4
106
45
41
39
38
36
34
53-1/8 (1,350)
17
3 × 12
1 × 8
3.7 (0.34)
Grooved H-pin (Copper)
Slit (Aluminum)
Hydrophilic coating
Anti-mold
PP monofilament net
Plastic
106 (48)
134 (61)
Ø 3/8 (9.52)
Ø 5/8 (15.88)
2. Specifications