Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 640

 Indoor unit address setting
1. In initial display of the setting mode, by pressing SET TEMP. "
button, select a remote controller address. (Select the indoor unit you want to operate.)
Initial display of
address setting mode
2. Press the FAN button. "Function number" indicator flashes.
3. Display the function number "01" by pressing SET TEMP. "
ton.
4. Press the FAN button. "Setting number" indicator flashes.
5. Set up the indoor unit address data by pressing SET TEMP. "
button. (Setting range is from "00" to "63".)
1-4. Address setting by remote controller
Example: When remote controller address
"01" is selected
Function number
" button or SET TEMP. "
Function number
Indoor unit address data
Indoor unit address data
Example: When indoor unit address data "12" is set
- (07-40) -
" button or SET TEMP. "
Remote controller address
" button or SET TEMP. "
1. System settings
"
" but-
"