Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 698

Function
Function
number
Switching
functions for
external
inputs and 60
external
outputs
terminals
Control
switching of
61
external
heaters
2-9. Function details
Factory
Setting number
setting
00 Mode 0
01 Mode 1
02 Mode 2
03 Mode 3
04 Mode 4
05 Mode 5
06 Mode 6
07 Mode 7
08 Mode 8
Auxiliary heater
00
control 1
Auxiliary heater
01
control 2
Heat pump
02
prohibition control
Auxiliary heater
03 control by outdoor
temperature 1
Auxiliary heater
04 control by outdoor
temperature 2
Auxiliary heater
05 control by outdoor
temperature 3
Auxiliary heat
06
pump control
Auxiliary heat
pump control by
07
outdoor
temperature 1
Auxiliary heat
pump control by
08
outdoor
temperature 2
Auxiliary heat
pump control by
09
outdoor
temperature 3
♦ Sets this function when connected to external devices
such as the VRF system ventilator, economizer,
humidifier, etc.
The connection terminal functions can be changed
depending on the type of external device.
For details of the connection terminal functions, refer
to "Indoor unit" in Chapter 8. EXTERNAL INPUT AND
OUTPUT on page 08-8.
NOTE: Inappropriate setting may cause an
external device malfunction. Confirm
whether all setting have been performed
appropriately according to the installing
condition.
♦
Sets the control method for external heater being
used.
For details of the control method, refer to
output" in Chapter 8. EXTERNAL INPUT AND
OUTPUT on page 08-5.
• Heater: external heater
• Heat pump: VRF outdoor unit
- (07-98) -
Details
"External
2. Function settings