Optional Parts - Fujitsu AIRSTAGE J-IIIL Design & Technical Manual

¢ Base heater
This is the output signal for base heater.
The output signal is on when the outdoor temperature goes down below 36°F (2°C), and signal is off
at the outdoor temperature 39°F (4°C).
CN115
(Black)
1 Connect to pin no.1 and pin no.3. No connection to pin no.2 and pin no.4.
* :
2 The allowable current is 1 A or less.
* :

2-5. Optional parts

Model name
UTY-XWZXZ6
UTY-XWZXZ9
UTY-XWZXZF
2-4. External output
PCB
1
Voltage: Power supply
2
input voltage
1
*
3
18 AWG (0.82 mm
4
External connect kit
Exterior
Base heater *
2
)
Q'ty
For external input.
(Low noise mode, Cooling/Heating priority,
Outdoor unit operation peak control, Emergency/
1
Batch stop)
For external output.
(Error status, Operation status)
For external output.
1
(Base heater)
For external input.
1
(Electricity meter pulse)
- (08-6) -
2
Usage
2. Outdoor unit