Adaptor/Convertor Units; Network Convertor (Uty-Vtgx) - Fujitsu AIRSTAGE J-IIIL Design & Technical Manual

3. Adaptor/Convertor units

RELATED LINKS
"Adapter/Convertor/Maintenance tool"

3-1. Network convertor (UTY-VTGX)

¢ Accessory
Name and shape
Cable tie
Screw (M4 × 16 mm)
Installation manual
3-1. Network convertor (UTY-VTGX)
in Chapter 1. GENERAL INFORMATION on page 01-8
• With this Network convertor, single split type and multi system
air conditioners can be controlled by System controller, Touch
panel controller, Central remote controller in VRF network sys-
tem or by Wired remote controller connected to the Network
convertor.
• Start/Stop, operation mode, temperature setting, fan speed,
etc. can be done with these controllers.
• One Network convertor can be connected and controlled up to
16 indoor units.
• One Wired remote controller is possible for one Network con-
vertor by UTY-VTGX.
• Up to 100 Network convertor can be connected in one VRF
network system. (One Network convertor is regarded as one
refrigerant system. The total refrigerant system in one VRF
network system must be within 100.)
Q'ty
For mounting the remote controller cable and
7
transmission cable
4 For mounting the Network convertor
1
- (05-109) -
Application
3. Adaptor/Convertor units