Configuring The Load Controller - Siemens LMV50 Series Manual

Selection of operating
mode
Menu level 1 Menu level 2
Params & Display
SystemConfig
Menu level 1 Menu level 2
Params & Display
LoadController
Menu level 1
Menu level 2
Params & Display
LoadController
Building Technologies

9.5 Configuring the load controller

↑ Operating modes with the load controller
Example: Internal load controller with Pt1000 sensor.
Menu level 3
LC_OptgMode
Or, alternatively:
Menu level 3
Configuration
After the internal load controller has been activated, the sensor input must be selected
and configured.
Menu level 3
Configuration
Basic Documentation LMV5...
9 Commissioning instructions for the LMV5
Menu level 4 Menu level 5
ExtLC X5-03
Int LC
Int LC Bus
Int LC X62
Ext LC X62
Ext LC Bus
Menu level 4 Menu level 5
LC_OptgMode
ExtLC X5-03
Int LC
Int LC Bus
Int LC X62
Ext LC X62
Ext LC Bus
Menu level 4 Menu level 5
SensorSelect
Pt100
Pt1000
Ni1000
TempSensor
PressSensor
Pt100Pt1000
Pt100Ni1000
NoSensor
Menu level 6
Menu level 6
Menu level 6
183/327
CC1P7550en
22.05.2018