Parameter Initialize & Lock - LG SV-iC5 Series Instruction Manual

Used when an inverter operates 2 motors connected to two different types of the loads.
nd
2
two motors with an inverter by exchanging them, different values can be set for the 2
Multi-function input terminal and parameters set in H81-H90.
Turn the I24(setting: 12) On after motor is stopped.
Parameters from H81 to H90 are applied to the 1
10.14 Parameter initialize & Lock
Parameter initialize
Group LED Display
Function
H93
group 2
Select the group to be initialized and initialize the parameters in H93.
Press the Prog/Ent ( ) key after selecting the desired number in H93. H93 will reappear after the
setting.
motor operation does not run 2 motors at the same time. As the figure below, when using
SV-iC5
Parameter Name
[Parameter initialize]
st
motor as well as the 2
Motor
1
Motor
2
P5
0
Initialize
1
groups
2 Initialize Drive group Only
Initialize Function group 1
3
Only
Initialize Function group 2
4
Only
5 Initialize I/O group Only
10-17
10. Advanced functions
nd
nd
motor.
Min/Max
Range
-
all 4 parameter
SV-iC5
motor via the
Factory
Default
0