LG SV-iC5 Series Instruction Manual page 46

7. Function list
LED Parameter
display name
F20 [Jog
frequency]
F21 [Max
frequency]
F22 [Base
frequency]
F23 [Start
frequency]
F24 [Frequency
high/low limit
select]
F25 [Frequency
2) high limit]
F26 [Frequency low
limit]
F27 [Torque Boost
select]
F28 [Torque boost
in forward
direction]
Min/Max
range
0/400 This parameter sets the frequency for Jog
[Hz] operation.
It cannot be set above F21 – [Max
frequency].
40/400 * This parameter sets the highest frequency
[Hz] the inverter can output.
It is frequency reference for Accel/Decel
(See H70)
If H40 is set to 3(Sensorless vector), it can
be settable up to 300Hz *.
☞ Caution : Any frequency cannot be set
above Max frequency.
30/400 The inverter outputs its rated voltage to
[Hz] the motor at this frequency (see motor
nameplate). In case of using a 50Hz motor,
set this to 50Hz.
0/10 The inverter starts to output its voltage at
[Hz] this frequency.
It is the frequency low limit.
0/1 This parameter sets high and low limit of
run frequency.
0/400 This parameter sets high limit of the run
[Hz] frequency.
It cannot be set above F21 – [Max
frequency].
0/400 This parameter sets low limit of the run
[Hz] frequency.
It cannot be set above F25 - [Frequency
high limit] and below F23 – [Start frequency].
0/1 0 Manual torque boost
1 Auto torque boost
0/15 [%] This parameter sets the amount of torque
boost applied to a motor during forward run.
It is set in percent of Max output voltage.
Description
7-4
Function group 1
Factory Adjustable
defaults during run
10.0 O
60.0 X
60.0 X
0.5 X
0 X
60.0 X
0.5 X
0 X
5 X
SV-iC5
Page
10-3
9-19
9-15
9-19
9-19
9-17
9-17