LG SV-iC5 Series Instruction Manual page 37

Parameter initialize
How to initialize parameters of all four groups in H93
Function
group 2
1
2
3
4
5
6
7
8
9
10
-. In H0, press the Prog/Ent ( ) key once.
-. Code number of H0 is displayed.
-. Increase the value to 3 by pressing the Up ( ) key.
-. In 3, press the Left ( ) key once to move the cursor to the left.
-. 03 is displayed. 0 in 03 is active.
-. Increase the value to 9 by pressing the Up ( ) key.
-. 93 is set.
-. Press the Prog/Ent ( ) key once.
-. The parameter number is displayed.
-. Press the Prog/Ent ( ) key once.
-. Present setting is 0.
-. Press the Up ( ) key once to set to 1 to activate parameter initialize.
-. Press the Prog/Ent ( ) key once.
-. Return to the parameter number after blinking. Parameter initialize has been
complete.
-. Press the either Left ( ) or Right ( ) key.
-. Return to H0.
5-13
5. Programming keypad
SV-iC5