LG SV-iC5 Series Instruction Manual page 58

7. Function list
LED Parameter
display name
I 0 [Jump code]
I 1 [Filter time
constant for
V0 input]
I 2 [V0 input Min
voltage]
I 3 [Frequency
corresponding
to I 2 ]
I 4 [V0 input Max
voltage]
I 5 [Frequency
corresponding
to I 4]
I 6 [Filter time
constant for
V1 input]
I 7 [V1 input Min
voltage]
I 8 [Frequency
corresponding
to I 7]
I 9 [V1 input max
voltage]
I10 [Frequency
corresponding
to I 9]
I11 [Filter time
constant for I
input]
I12 [I input
minimum
current]
Min/Max
range
0/63 This parameter sets the code number to jump
0/9999 This is used to adjust the analog voltage input
signal via keypad potentiometer.
0/10 Set the minimum voltage of the V0 input.
[V]
0/400 Set the inverter output minimum frequency at
[Hz] minimum voltage of the V0 input.
0/10 Set the maximum voltage of the V0 input.
[V]
0/400 Set the inverter output maximum frequency at
[Hz] maximum voltage of the V0 input.
0/9999 Set the input section's internal filter constant for
V1 input.
0/10 Set the minimum voltage of the V1 input.
[V]
0/400 Set the inverter output minimum frequency at
[Hz] minimum voltage of the V1 input.
0/10 Set the maximum voltage of the V1 input.
[V]
0/400 Set the inverter output maximum frequency at
[Hz] maximum voltage of the V1 input.
0/9999 Set the input section's internal filter constant for
I input.
0/20 Set the Minimum Current of I input.
[mA]
Description
7-16
I/O group
Factory Adjustable
defaults during run
1 O
10 O
0 O
0.0 O
10 O
60.0 O
10 O
0 O
0.0 O
10 O
60.0 O
10 O
4 O
SV-iC5
Page
5-5
9-2
9-3
9-4