Operating Precautions - LG SV-iC5 Series Instruction Manual

Important User Information
pinching.
Otherwise, you may get an electric shock.
Install the inverter on a non-flammable surface. Do not place flammable
material nearby.
Otherwise, fire could occur.
Disconnect the input power if the inverter gets damaged.
Otherwise, it could result in a secondary accident and fire.
After the input power is applied or removed, the inverter will remain hot for
a couple of minutes.
Otherwise, you may get bodily injuries such as skin-burn or damage.
Do not apply power to a damaged inverter or to an inverter with parts
missing even if the installation is complete.
Otherwise, electric shock could occur.
Do not allow lint, paper, wood chips, dust, metallic chips or other foreign
matter into the drive.
Otherwise, fire or accident could occur.
(1) Handling and installation
Handle according to the weight of the product.
Do not stack the inverter boxes higher than the number recommended.
Install according to instructions specified in this manual.
Do not open the cover during delivery.
Do not place heavy items on the inverter.
Check the inverter mounting orientation is correct.
Do not drop the inverter, or subject it to impact.
Use the Type 3 grounding method for 200 V Class (Ground impedance: Below 100 ohm).
Take protective measures against ESD (Electrostatic Discharge) before touching the pcb for inspection or
installation.
Use the inverter under the following environmental conditions:
Environment

OPERATING PRECAUTIONS

Surrounding
temperature
Relative
humidity
Storage
temperature
Location
Altitude,
Vibration
CAUTION
-10 ~ 50℃ (non-freezing), Ambient 40°C for models SV004iC5-1,
SV004iC5-1F, SV008iC5-1, and SV008iC5-1F (UL 508C)
90% RH or less (non-condensing)
- 20 ~ 65 ℃
Protected from corrosive gas, combustible gas, oil mist or dust
Max. 1,000m above sea level, Max. 5.9m/sec
ii
2
(0.6G) or less
SV-iC5