Table of Contents
Advertisement
25.5
Sensors Activating SERVICE Signal (H4/U5)
Menu H4/U5 is a list of the sensor(s) having activated service signal.
When SERVICE signal is generated in the system, the search symbol
display's symbol area.
Regarding the SERVICE signal levels, see the EBLWin "Help" instructions, chapter
"SERVICE signal".
Note: SERVICE signal provides only information to indicate that the sensor is to be
replaced soon with a new/clean sensor. After the replacement, the SERVICE signal has to
be acknowledged for this sensor, see chapter "Acknowledge SERVICE signal (H8/S2)",
page 152.
Action
"Menu"
Scroll to menu H4.
"↲"
Scroll to menu U5.
"↲"
"ESC"
Text in display
H4 Present system status
U1 Disablement
U2 Disablement by time channel
U3 Open doors
U4 Sensor values
U5 Sensors activating SERVICE signal
U6 Technical warning
U7 Event log
U8 Information
U5 Sensors activating SERVICE signal
Sensor, Zone ZZZ address AA needs service
technical number xxxxxx
14-03-2013 09:09:15
Sensor, Zone ZZZ address AA needs service
technical number xxxxxx
14-03-2013 19:09:35
Number of sensors: 2
U5 Sensors activating SERVICE signal
131
Operation Manual
FT1020G3 Rev 2.10.4
is shown in the
Comments
According to chapter
"Access", see page 42.
If there are no sensors
activating service signal,
--List is empty-- will be
shown. It is a list in
which you can scroll
with "▼" or "▲".
Scroll to another menu
or press "ESC".
Advertisement
Table of Contents
