Sensors Activating Service Signal (H4/U6) - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748
26.6
Action
"Access"
Scroll to menu H4.
"A"
Scroll to menu U6.
"A"
"Return"
Rev: 1

Sensors activating SERVICE signal (H4/U6)

Service signal is indicated by LED "Service" (L12). The sensor week
average value is below or over the service level respectively for one or
more sensors.
Instructions, chapter "Service signal".
Menu H4/U6 is a list of the sensor(s) activating service signal.
NOTE! Service signal is only information that the sensors have to be
cleaned / replaced soon. The service signal has to be acknowledged,
see chapter "Acknowledge SERVICE signal (H8/S4)", page 123.
It is not possible to get a print-out from menu H4/U6.
Text in display
Present system status on display and
printer
Disablement
Printout: (1=yes)
Sensors activating SERVICE signal
Sensor : xxxxxx needs service
Sensors activating SERVICE signal
Operating Instructions Fire alarm system EBL512 V2.3.x
(Regarding the service signal levels, see Planning
ACCEPT? H4
100
Comments
According to chapter
"Access", see page 72.
U1
Press "A" to accept.
U6
L = a list in which you
can scroll. Press "Return"
L
to menu U6. (If there are
no sensors in the list,
menu U6 will be shown
again.).
Scroll or press "Return"
to menu H4. Scroll or
U6
press "Return" to log off.