S/W Versions; Documents; Applications; Pc S/W - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748 Rev: 1
3.2
3.3
3.4
3.5
Operating Instructions Fire alarm system EBL512 V2.3.x
battery capacity (backup time) and/or the EBL512 current
consumption. See the EBL512 Planning Instructions, chapter "Power
supply" for more information.

S/W versions

Due to continual development and improvement, different S/W
versions can be found. When installing a new control unit in a system
with "older" control units, you might have to update the S/W in the
old control units. It is highly recommended to have the same S/W
version in all control units but the S/W version 2.X.x require the
same S/W version in all control units.

Documents

The following documents (except this document) are available:
• Planning instructions
• Drawings
Normally information that is found in one document is not to be found
in another document, i.e. the documents complement each other.

Applications

The EBL512 system is intended for small, medium and large
installations. The intelligent control units offer the system designer
and end user a technically sophisticated range of facilities and
functions. Programming (PC S/W Win512) and commissioning of the
control unit / system is very easy. Start with one control unit and then,
when required, add more units. The TLON network makes it possible
to install the control units in one building or in many buildings.

PC S/W

Win512 is used for programming and commissioning of one or more
control units:
•
download / backup of site specific data (SSD)
•
download of S/W / settings / conventions / configurations / C.U.
& system data / etc.
•
create and download the user definable text messages shown in
the alphanumeric display in the C.U. / ext. FBP and in the Display
units.
Win512 shall have the same (or higher) version number as the
EBL512 S/W version number (e.g. 2.2). Backup require the same
version number (in Win512 and EBL512). Old files can be opened
and saved in a higher version of Win512 and thereafter downloaded.
TLON Manager is used for network programming.
NEWTEXT (DOS based "older" program) can be used to create /
download the user definable text messages in the Display units
connected to the COM loops.
13