Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748
32
Action
"Access"
Scroll to menu H10.
"A"
Enter the old code, the
new code and the new
code again.
Rev: 1
Change access code for daily
duties (H10)
For security reasons, the default code should be changed.
Text in display
Change access code for daily duties
Access code: _
New code:
Access code: ****
New code: ****
Incorrect access code, NO change
Change access code for daily duties
NOTE! After change of access code it is recommended do a "Safe
shutdown of the control unit" (see menu H8/S8). This will save the
SSW data (e.g. the new code) in a Flash ROM (see page 69).
If the valid access code is unknown a "back door code" is available.
Operating Instructions Fire alarm system EBL512 V2.3.x
ACCEPT? H10
Verify:
Verify: ****
ACCEPT? H10
138
Comments
According to chapter
"Access", see page 72.
The digits are replaced
(****) in the display.
The code was not correct.
Try again.
The code was correct and
is now changed to the new
code. Scroll or press
"Return" to log off.