Configuration (H4/U8) - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748
26.8
Action
"Access"
Scroll to menu H4.
"A"
Scroll to menu U8.
"A"
"Return"
Rev: 1

Configuration (H4/U8)

In a control unit the menu H4/U8 can be used to see the following
settings (made in Win512, "Tools" menu) for that specific control
unit:
Number of addresses that can be used, i.e. xxx = 128, 256 or 512 (set
in "EBL512 settings" dialog box).
Language The language for texts presented in the alphanumeric
display / print-outs. Language file (nnnn.SST) to be downloaded is
selected (in "Download software..." dialog box)
Convention Different countries have different conventions, i.e.
country specific functions, etc.
Win512, menu Tools | Settings...("Win512 Settings" dialog box).
It is not possible to get a print-out from this menu.
Text in display
Present system status on display and
printer
Disablement
Printout: (1=yes)
Show configuration
Max number of allowed loop units xxx
Language:nnnnnnnnnn Conv.:cccccccccc
Show configuration
80
To set (change) the convention in Win512, Level 2 has to be selected and
a password is required.
Operating Instructions Fire alarm system EBL512 V2.3.x
Convention is set (changed) in
ACCEPT? H4
102
80
Comments
According to chapter
"Access", see page 72.
U1
Press "A" to accept.
U8
Press "Return" to menu
U8.
Scroll or press "Return"
to menu H4. Scroll or
U8
press "Return" to log off.