Event Log (H4/U7) - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748
26.7
Action
"Access"
Scroll to menu H4.
"A"
Scroll to menu U7.
Alternative "A"
Alternative "1"
Write number of events
to be printed,
e.g. "010"
"A"
"A"
Rev: 1

Event log (H4/U7)

This is a list of events. Type and number of events in the list, etc. can
be set in Win512 (see Planning Instructions and Win512 help).
From this menu, it is possible to get a print-out.
The events can be listed:
Via display: See Alternative "A" below.
Via a print-out: See Alternative "1" below.
NOTE! The event logging is disabled as long as menu H4/U7 is
open.
Text in display
Present system status on display and
printer
Disablement
Printout: (1=yes)
Event log
Printout: (1=yes)
When "A" is pressed, an event will be shown in the display,
e.g:
FIRE ALARM zone 123 address 45
or
FIRE ALARM zone 456
Many alarms in zone
How many events should be printed? 000
How many events should be printed? 010
Printing started. To stop printing press
C and 0 simultaneously.
Show event log
Printout: (1=yes)
A)
More than one alarm point in zone 456 have activated fire alarm.
Operating Instructions Fire alarm system EBL512 V2.3.x
ACCEPT? H4
MM-DD HH:MM
A)
MM-DD HH:MM
ACCEPT?
ACCEPT?
ACCEPT?
101
Comments
According to chapter
"Access", see page 72.
U1
Press "A" for display
presentation
U7
Press "1" for print-out.
The most recent event
will be shown, i.e. use
" " to scroll upwards in
the list. Press "Return"
XX
to menu U7.
(XX in the example =
control unit number.
XX
XX=99=Win512).
Press "A" to start print-
out.
Scroll or press "Return"
to menu H4. Scroll or
U7
press "Return" to log off.
or