Table of Contents
Advertisement
Panasonic Electric Works Nordic AB
MEW01349
27.6
Action
"Menu"
Scroll to menu H4.
"↵ "
Scroll to menu U6.
"↵ "
"↵ "
"ESC"
Rev: -
Operating Instructions Fire alarm system EBL512 G3, V1.1.x
Event log (H4/U6)
Three event logs are available:
1. Alarm log (alarm events, e.g. fire alarm, fire alarm reset, etc.)
2. Interlocking log (only interlocking events)
3. General event log (all other type of events)
The origin of the event, e.g. CU00 (see below), can instead be
WinG3, WebG3 or Ext# (External system no. # connected via Web-
server.
Text in display
H4 Present system status
U1 Disablement
U2 Disablement by time channel
U3 Open doors
U4 Sensor values
U5 Sensors activating SERVICE signal
U6 Event log
U7 Information
U6 Event log
Select event log:
Alarm log
Interlocking log
General event log
↵
(When "
" is pressed, the events will be shown in the
display. The most recent event is on top of the list.
Some examples are shown below.)
Reset all alarms
2009-12-03 09:25:30
FIRE ALARM zone 123 address 45
2009-12-03 09:09:15
FIRE ALARM zone 123 address 46
2009-12-03 09:07:01
Event 15 to 13 of 21
Escape
menu
Print
U6 Event log
NOTE!
During printing "Print" will be replaced with "Abort
printing".
112
Comments
According to chapter
"Access", see page 85.
Use "▼" or "▲" to select
a log. (E.g. the "Alarm
log".)
A dynamic list in which
you can scroll with "▼" or
"▲".
If printer is mounted the
soft key "Print" will be
CU00
visible, else not. Press
"Print" to select and print
the events the latest hour,
CU00
day, week or month.
Scroll with "▼" or "▲" to
view more events.
CU00
If there are no events in
the list when "↵" is
pressed, the list view will
not open.
Scroll to another menu or
press "ESC".
Advertisement
Table of Contents
