Activate Interlocking Output (H9/C2) - Panasonic MEW01349 Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01349
32.2
Action
"Menu"
Scroll to menu H9.
"↲ "
Scroll to menu C2.
"↲ "
"↲ "
Rev: - Operating Instructions Fire alarm system EBL512 G3, V1.1.x

Activate interlocking output (H9/C2)

The output in each interlocking combination (area / point) can be
manually activated via this menu. The corresponding interlocking
input will be "monitored" in the same way as if the output was
activated by its control expression.
Reset has to be performed via menu H9/C3.
Text in display
H9 Interlocking outputs and inputs
C1 Activated interlocking outputs / inputs
C2 Activate interlocking output
C3 Reset interlocking output
C4 Disable interlocking output
C5 Re-enable interlocking output
C2 Activate interlocking output
Activate interlocking output
area: 000 point: 00
(press ↵)
C2 Activate interlocking output
146
Comments
According to chapter
"Access", see page 85.
Write the area number and
point.
"↲ "
Press .
Scroll to another menu or
press "ESC".