Table of Contents
Advertisement
Panasonic Electric Works Nordic AB
MEW01349
23
Action
"Menu"
Enter the code (4 digits)
Rev: -
Operating Instructions Fire alarm system EBL512 G3, V1.1.x
Access
To use the key pad in the control unit (to get access to the menu tree),
it is necessary to logon with an access code for level 2B or 3A. See
also chapter "Access levels", page 24.
Open the door in the control unit (= level 2A), press the soft key
"
Menu
" (P4) and continue as follows:
Text in display
Control Unit: XX
User definable text.
User definable text.
yyyy-mm-dd hh:mm
Menu
Access code:
Access code:
NO ACCESS!
▒▒▒ menu
H1 Perform monthly test
H2 Disable or re-enable
H3 Set calendar and clock
H4 Present system status
H5 Service
H6 FAULT Acknowledge
H7 Perform ZONE TEST
H8 Maintenance
H9 Interlocking outputs and inputs
H10 Change access code for daily duties
Escape
menu
NOTE!
When the Russian, Ukraine, Australian or the New Zealand language
is selected the date is shown as follows: dd-mm-yyyy.
EBL512 G3
85
Comments
XX = 00 – 29
year-month-date
hour:minute
The digits are replaced by
in the display.
The access code was not
correct. Try again.
The access code was
correct. A main menu list
is displayed. Press "↵ " to
accept (menu H1) or scroll
/ jump to the wanted menu
(H2-H10) and press "↵ ".
Advertisement
Table of Contents
