Service (H5) - Panasonic MEW01349 Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01349 Rev: -
28
Operating Instructions Fire alarm system EBL512 G3, V1.1.x

Service (H5)

When commissioning an installation and by maintenance (e.g. when
you power on and when you are programming a control unit / system),
menu H5 can be used for certain information and help.
Only authorised personnel have access to the level 3A menus.
Access code for level 3A is required.
55
Via a PC and WinG3 (+ access code for level 3B) you can:

download / backup (upload) the site specific data (SSD)

create and download software (S/W), settings, configurations,
control unit and system properties.

create and download the user definable text messages (alarm
texts) shown in the display in the control unit, ext. FBP and other
Display units.
56
Via a PC and TLON Manager you can create and download
(install) the TLON network configuration (project).
55
Connected to the "USB" connector above the front panel.
56
Connected to the modular connectors J10 (TLON network 0) or J11
(TLON network 1) on the main board 5010.
115