Service (H5) - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748 Rev: 1
27
Operating Instructions Fire alarm system EBL512 V2.3.x

Service (H5)

When commissioning an installation and by maintenance (power on
and programming a control unit / a system), menu H5 is used to get
certain information and help.
Only authorised personnel have access to level 4 menus. Access code
for level 4 is required.
81
Via a PC and Win512 (+ access code for level 5) you can:
•
download / backup site specific data (SSD)
•
download of S/W / settings / configurations / C.U. & system data
•
create and download the user definable text messages shown in
the alphanumeric display in the C.U. / ext. FBP and in the Display
units.
82
Via a PC and TLON Manager you can do the TLON network
programming / configuration.
TLON Manager is used for programming of network data / addresses
/ etc.
NEWTEXT (a DOS based "older" program) can be used to create /
download the user definable text messages shown in the Display units
connected to the COM loops.
81
Connected to the "D" connector J1 on the main board 1556.
82
Connected to the modular connector J2 on the main board 1556.
103