Access Level 2 - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748 Rev: 1
7.3
Operating Instructions Fire alarm system EBL512 V2.3.x
NOTE! In conjunction with a fire alarm, the fire brigade personnel
can use "P8" (without any access code) to get access to the menu X1
to scroll through all the fire alarms (e.g. see all point alarms).

Access level 2

From access level 1, the user can logon to access level 2, which gives
access to the following menus:
H1 Perform monthly test.
H2 Disable or re-enable.
B1 Disable zone
B2 Disable zone / address
B3 Disable control output
B4 Re-enable zone
B5 Re-enable zone / address
B6 Re-enable control output
B7 Re-enable non-reset zone / address
B8 Control on / Control off
B9 Alarm devices on / Alarm devices off
H3 Set calendar and clock.
H4 Present system status on display and printer.
U1 Disablement
U2 Disablement by time channel.
U3 Show open doors.
U4 Activated 2-zone / address dependent zone / address.
U5 Show sensor values.
U6 Sensors activating service signal
U7 Show event log
U8 Show configuration
H6 Acknowledge faults.
H7 Perform zone test (Test mode).
19
This function is normally not enabled. It can be enabled via Win512, but
this is a violation to the EN54-2 standard.
20
A door is open. See chapter "Door open", page 29.
22
19
20