Key Cabinet Alarm; Key Cabinet Opened Before A Fire Alarm - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748 Rev: 1
14.4
14.4.1
Operating Instructions Fire alarm system EBL512 V2.3.x
• Outputs programmed for heavy smoke / heat alarm are
47
activated.
• Each heavy smoke / heat alarm is printed
*** Heavy smoke ***
Point: 123-45
User programmable text message (if progr.)
or
Zone: 123
User programmable text message (if progr.)
*** Heavy heat ***
Point: 123-45
User programmable text message (if progr.)
or
Zone: 123
User programmable text message (if progr.)
Heavy smoke / heat alarm will be reset when the fire alarm
respectively is reset, see chapter "Alarm reset", page 41.

Key cabinet alarm

One programmable input
cabinet.
The fire brigade uses a key cabinet to store a key to the building.
NOTE! In the DBI (Danish) convention the key cabinet alarm
function is a little different, see below.

Key cabinet opened before a fire alarm

If the key cabinet is opened before a fire alarm (e.g. if somebody
illegally breaks into the key cabinet), a key cabinet alarm, i.e. a "fire
alarm" will be generated.
Example; Key cabinet alarm (xx = control unit number):
POINT: KEY-xx
Alarm from key cabinet
It will be printed like a normal fire alarm (when printer is available),
see chapter "Fire alarm", page 34.
Key cabinet alarm is reset like a normal fire alarm, see chapter "Fire
alarm reset, page 41.
47
General heavy smoke / heat alarm and individual alarm points / zones.
48
When printer is available (e.g. control unit 1549).
49
Input I0-I3 or COM loop input unit can be used.
39
Time HH.MM Date MM-DD
Time HH.MM Date MM-DD
Time HH.MM Date MM-DD
Time HH.MM Date MM-DD
49
per c.i.e. can be used to connect a key
48
, e.g.:
No.:001