Panasonic EBL512 Operating Instructions Manual page 100

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748
"Access"
Scroll to menu H4.
"A"
Scroll to menu U5.
"A"
"A"
" "
"Access"
Enter code for level 3 (4
digits)
" "
" "
"A"
Rev: 1
Sensor values and setting alarm algorithm for the Analog heat
detector 3308 / 3309:
Text in display
Present system status on display and
printer
Disablement
Printout: (1=yes)
Sensor values
Printout: (1=yes)
Enter technical number: 000000
Sensor: 000003
Momentary: XX°C
Sensor: 000003
Current algorithm: A1
Access code: _
Access code: ****
Change algorithm: (000003 Current A1)
A1 A2 B
Change algorithm: (000003 Current A1)
A1 A2 B
Algorithm for sensor 000003 is changed
from A1 to B
Operating Instructions Fire alarm system EBL512 V2.3.x
ACCEPT? H4
Min: XX°C
Max: XX°C
98
Comments
According to chapter
"Access", see page 72.
U1
To make a printout, press
U5
"1", else press "A" to
accept.
Write the sensor's techn.
number and/or press "A"
to accept.
This is a list in which
you can scroll or use
" " to see the next
information window for
the selected sensor. Press
"Return" to Enter
technical number.
A1 = short name, see
separate table, page 93.
Press "Return" to Enter
technical number or
press "Access" to change
the algorithm.
If login was made with
code for level 3, no code
is needed.
The digits are replaced
(****) in the display
" " or " ".
Use