Table of Contents
Advertisement
Panasonic Electric Works Nordic AB
MEW01349
Rev: -
20
20.1
Operating Instructions Fire alarm system EBL512 G3, V1.1.x
New system program (S/W) version
download
The latest software (S/W) version of the EBL512 G3 system program
is factory downloaded before the delivery.
development and improvement, different S/W versions can be found.
The valid S/W version for the Main board 5010 and the MMI board
5011 respectively, can be read in menu H4/U7 (system information)
or via WinG3. On site, new S/W can be downloaded via WinG3. See
also the WinG3 help chapter (help topic) "Download Software".
EBL512 G3 type 5000 has both a Main board 5010 and an MMI board
5011. EBL512 G3 type 5001 has only a Main board 5010.
On site, new S/W for the 1728, 1735, 1736, 1826 & 1828 units can be
downloaded via WinG3. See the "Technical Description" for the unit
respectively.
Single control unit (c.i.e.)
In a single c.i.e. shall not have a TLON connection board 1590
mounted.
(When a c.i.e. has a TLON connection board 1590
mounted, it is expected to be one c.i.e. in a TLON network and TLON
network programming is required.)
To download a new software (system program) version, a PC and
WinG3 are used. The BIN file that shall be downloaded contains
software for the main board 5010, software for the MMI board 5011
and a text file, i.e. there is one BIN file for each language / country.
1. Connect the PC to the USB connector in the c.i.e. and start
WinG3. In the "Tools" menu select "Download Software..." to
open the dialog box and do the required settings:
- Select the path and the software file name, e.g.
English_EBL512G3_100.BIN (100 = version 1.0.0.)
- Mark the checkbox "No MMI board" if it is an EBL512 G3 type
5001, i.e. the MMI software and the text file will not be
downloaded.
- Select the COM port to be used on your PC.
77
Due to continual
Advertisement
Table of Contents
