Table of Contents
Advertisement
Panasonic Electric Works Nordic AB
MEW01349
Rev: -
H1 Perform monthly test
H2 .....
Operating Instructions Fire alarm system EBL512 G3, V1.1.x
NOTE_1! During the test, the following information will be shown in
all other c.i.e. displays:
Zones in test mode: 001, 002, 003, 004
NOTE_2! If an alarm point (e.g. a manual call point) is in alarm state
when the test mode is ended, there will not be a fire alarm activated.
Instead the alarm point will be disabled and has to be re-enabled again
via menu H2/B5.
NOTE_3! When the "Fire door closing" function is used, the fire
door will be closed when the detectors controlling the door are tested,
in test mode.
89
press "ESC".
Advertisement
Table of Contents
