How Do I Export Data - Huawei FusionCol8000-C210 User Manual

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual

11.1.17 How Do I Export Data?

Context
With the one-click mode, you can export active alarms, historical alarms, run logs,
and so on.
You are advised to use the FAT32 USB flash drive with a capacity no greater than
64 GB. For a non-FAT32 USB flash drive, format it to the FAT32 format using a
computer.
Before using a USB flash drive, ensure that its data has been scanned by antivirus
software and is secure.
Procedure
Step 1 Choose Maint > USB Operations > Export to enter the Select Path screen.
Figure 11-11 Select Path
Step 2 Tap the file where the user saves current data in the Select Path dialog box and
tap Next. Then tap Yes in the displayed dialog box.
Step 3 After the data is successfully exported, tap Finish.
Step 4 On the home screen, choose Maint > USB Operations > Remove USB to remove
the USB flash drive in safe mode.
----End
Issue 05 (2022-12-15)
NO TICE
NO TE
● Before exporting active alarms, historical alarms, logs, and configurations, ensure that
the USB flash drive has been successfully identified. The USB port is located on the side
of the main control board.
● If the USB flash drive has been successfully identified,
● If the USB flash drive is not properly connected, the system will display No USB device
found. during operations about the USB flash drive.
Copyright © Huawei Digital Power Technologies Co., Ltd.
11 FAQ
is displayed in the status bar.
149