Optional) Setting Wifi Parameters - Huawei FusionCol8000-C210 User Manual

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual
4.
Step 5 Tap the text box next to SNMP Port, set SNMP Port based on the actual port
number, and tap Submit.
Step 6 Tap Next Page.
Step 7 Set SNMP trap parameters.
1.
2.
3.
4.
----End
Follow-up Procedure
After a USB flash drive has been inserted into the USB port of the main control
board and successfully identified, tap Export File under MIB File to export the
MIB file to the USB flash drive for the customer's use in accessing a third-party
NMS.
Before using a USB flash drive, ensure that its data has been scanned by antivirus
software and is secure.
Figure 5-12 MIB file exported successfully

5.5.5 (Optional) Setting WIFI Parameters

Issue 05 (2022-12-15)
Set AES Password and Confirm Password as planned.
NO TE
SNMP Port is set to 161 by default.
Tap Add under SNMP Trap.
Set Trap Address as planned and Trap Port to the actual port number.
NO TE
Trap Port is set to null by default.
Select SNMP Version. If an SNMPv3 user is configured, it is recommended
that SNMP Version be set to SNMPv3.
If SNMP Version is set to SNMPv3, you need to select SNMPv3 User Name.
For other protocols, you need to set Trap Community.
Figure 5-12 shows successful file export.
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Power-On Commissioning
95