Hitachi WJ200 Series Quick Reference Manual page 23

[Setting example]
After power ON, changing from . display to change the  (Run command source)
data.

Press [ESC] key to show
the function code

ESC

Press [ESC] key to move
on to the function group

ESC

Press [ESC] key Once to move
on to the function group .


function code



Press SET key to display the data of

SET
:Fix and stores the data and moves back to the function code
:Cancels the change and moves back to the function code
ESC
Function code xxx are for monitor and not possible to change.
Function codes xxx other than  are reflected on the performance just after changing the data
(before pressing SET key), and there will be no blinking.

ESC
SET

Press Up key to change increase

)
(
SET
ESC

SET
⑧ Press SET key to set
and save the data

Data of will be shown on the
display after the first power ON
.

 Display is solid lighting.


Press up key to increase the
data (
When data is changed, the display

starts blinking, which means that new
data has not been activated yet.
17
 )