Table of Contents
Advertisement
SAFETY SUMMARY
General Safety Precautions
Safety Precautions During Use
If an abnormal condition such as unusual noise, odor or fumes occurs during
operation of the instrument, the power supply should be turned off immediately.
Disconnect the power cord plug from the power outlet. Then, after providing proper
safety measures as required, contact the nearest service representative of Hitachi
High-Technologies.
Using the instrument in such an abnormal condition could result in an electric shock or
fire.
Radiation from the Laser Light Source
The internal CD-ROM or CD-R/W drive of the PC is provided with a laser beam
source.
In normal operation of the PC containing the laser beam source, no laser beam
harmful to human health will be emitted outside. Note, however, that if a laser beam
leaking out of the PC accidentally gets into the eye, eye injury could occur. When
using the PC, carefully read the laser-related safety precautions described in the PC
manual. Be sure to observe these instructions and the following precautions:
Do not open the panel of the laser device. There are no user-serviceable parts
(a)
inside.
On any other laser device, do not attempt to operate or adjust.
(b)
WARNING
SAFETY - 2
Advertisement
Table of Contents
