Hitachi ChromasterUltra Rs 6270 Instruction Manual page 171

7.3 Vials
(5) Microplates
The following microplates and microplate seals are
recommended.
Name
96-holes
microplate
384-holes microplate
Table 7-13 Microplate Seals
Name
Plate seal
96-holes capmat
NOTE:
The plate seal in Table 7-13 is used exclusively for
aqueous samples. For organic solvent samples, use each
microplate by sealing it with the exclusive thermal fusing
type sealer or the like.
NOTE:
Use microplate seals to prevent sample evaporation,
contamination, fluid splash, and increase constant
temperature efficiency the well plate, when the microplate
is used.
Otherwise, the instrument performance may be degraded
without the microplate seal.
NOTE:
Be sure to use the microplate recommended by Hitachi
High-Tech Science. If other microplates are used, its
original performance may not be available.
7 - 19
Table 7-12 Microplates
Type
Manufactured by
Thermo Scientific,
269620
Manufactured by
Thermo Scientific,
265196
Type
Manufactured by
SUMITOMO BAKELITE
CO., LTD.
(Low-adhesion type)
MS-30011
Manufactured by
GE Healthcare Japan.
7704-0105
Remarks
Flat bottom
Flat bottom
Remarks
For aqueous
samples
Silicone