NEC PA1705UL-W Installation Manual page 136

To store your adjusted values in [LENS MEMORY]:
1. Project the connected device signal you want to adjust.
2. Adjust the projecting image of position, size and focus by the SHIFT/HOME POSITION,
ZOOM +/−, and FOCUS +/− buttons.
• Adjustment can be performed by the remote control. Please refer to "Adjusting the Picture
Size and Position" on page 26.
• Slight adjustment by moving the projector position and by the tilt foot is not subject of
[LENS MEMORY].
3. Move the cursor on [STORE] and press ENTER.
4. Move the cursor on [YES] and press ENTER.
To call up the adjusted values from [LENS MEMORY]:
1. From the menu, select [ADJUST] → [LENS MEMORY] → [MOVE] and press the ENTER but-
ton.
The confirmation screen will be displayed.
2. Press the ◀ button to select and [YES] and press the ENTER button.
During projection, if the adjusted values for an input signal have been saved, the lens will shift.
If not, the lens will shift according to the adjusted values stored in the selected [REF. LENS
MEMORY] → [PROFILE] number.
101
5. Using On-Screen Menu