NEC PA1705UL-W Installation Manual page 181

5. With the plate on the lens unit facing up,
insert the lens unit into the projector's lens
hole.
Align the position of the connector and gently
insert it as far back as possible.
6. While supporting the lens unit with your
hand, press the left side of the lens lock
lever towards the LOCK position until it
stops.
A clicking sound will confirm that the lens unit
is attached to the projector body.
The left and right parts of the lens lock lever
will open when the lens unit is attached cor-
rectly.
NOTE:
• The lens unit will not lock in place if it is tilted. Move the
lens lock lever while the lens unit is still attached to the
lens hole.
7. Attach the lens cover to the projector.
(1) Leave a gap of about 2 cm when attaching
the lens cover.
(2) Push it in the direction of the arrow.
6. Attachment/detachment of parts sold separately
c
c: Plate / d: Connector
b: Lens lock lever
146
d
b
a
a: Lens cover