Connecting Your Computer/Connecting The Power Cord - NEC PA1705UL-W Installation Manual

2-2. Connecting Your Computer/Connecting the Power Cord

1. Connect your computer to the projector.
This section will show you a basic connection to a computer.
Connect a commercially available HDMI cable between the computer's HDMI output connector
and the projector's HDMI 1 IN or HDMI 2 IN connector.
2. Connect the supplied power cord to the projector.
First connect the supplied power cord's three-pin plug to the AC IN terminal of the projector,
and then connect another plug of the supplied power cord directly in the wall outlet. Do not
use any plug converter.
CAUTION:
• This equipment is designed to be used in the condition of the power cord connected to
earth. If the power cord is not connected to the earth, it may cause electric shock. Please
make sure the power cord is earthed properly.
Do not use a 2-core plug converter adapter.
• Be sure to connect the projector and the computer (signal source) to the same earth point.
If the projector and the computer (signal source) will be connected to different earth
points, fluctuations in the earth potential may cause fire or smoke.
• To prevent the power cord from coming loose, make sure that all the prongs of the power
cord plug are fully inserted into the AC IN terminal of the projector before using the power
cord stopper. A loose contact of the power cord may cause a fire or electric shock.
Upon connecting the power cable, the POWER indicator of the projector will light.
2. Projecting an Image (Basic Operation)
19