NEC PA1705UL-W Installation Manual page 76

Change [REF. LIGHT MODE]
1. With the cursor adjusted to [REF. LIGHT MODE], press the ENTER button.
The [REF. LIGHT MODE] selection screen will be displayed.
2. Use the ▼▲ buttons to make a selection, and press the ENTER button.
The display will return to the [REF. LIGHT MODE] screen and the selected option will be applied.
Press the MENU button to return to the original screen.
NOTE:
• The light module hours used can be checked in [USAGE TIME] on the menu. Select [INFO.] → [USAGE TIME].
• After a lapse of 1 minute from when the projector displays a blue, black or logo screen, the projector goes into power saving mode
and the brightness of the projected image will decrease. When the projector detects the input signal, it will return to original
brightness.
• The projector's protection functions may temporarily reduce luminance (brightness) in hot operating environments. The TEMP.
indicator will light up in orange when the protection functions are active. At the same time, the Thermometer symbol [ ] is
displayed at the lower right of the menu screen. The temperature inside the projector decreases due to the room temperature
being lowered, returning to the original brightness.
41
3. Convenient Features