Table of Contents
Advertisement
BORDER
Select the display boundary of the main display and sub-display of the [PICTURE BY PICTURE] screen.
Main display
TIP:
• Seven options from zero to six are available.
[GEOMETRIC CORRECTION]
MODE
Set pattern for correcting distortion. If [OFF] is selected, the [GEOMETRIC CORRECTION] becomes
ineffective.
NOTE:
• If you need to change the [MENU ANGLE], make sure to change it before performing the [GEOMETRIC CORRECTION]. If [MENU
ANGLE] is changed after performing the [GEOMETRIC CORRECTION], corrected values will be reset to the default values.
KEYSTONE
Correct distortion in horizontal and vertical directions.
HORIZONTAL
Adjustments when projecting from a diagonal direction to the screen.
VERTICAL
Adjustments when projecting from the top or bottom direction to the screen.
HORIZONTAL SHIFT Adjusts the distortion when performing trapezoidal correction with the screen moved in the horizontal direc-
tion using the lens shift.
VERTICAL SHIFT
Adjusts the distortion when performing trapezoidal correction with the screen moved in the vertical direction
using the lens shift.
Sub-display
Main display
Display boundary
Sub-display
104
5. Using On-Screen Menu
Main display
Sub-display
Advertisement
Table of Contents
Troubleshooting
