NEC PA1705UL-W Installation Manual page 137

To automatically apply the adjusted values at the time of source selection:
1. From the menu, select [LOAD BY SIGNAL] and press the ENTER button.
2. Press the ▼ button to select and [ON] and press the ENTER button.
This will move the lens automatically to the position at the time of source selection according
to the adjusted values.
NOTE:
• The [LENS MEMORY] function may not produce a completely aligned image (due to tolerances in the lenses) using the adjusted
values stored in the projector. After calling up and applying the adjusted values from the [LENS MEMORY] function, finely adjust
the [LENS SHIFT], [ZOOM] and [FOCUS] to produce the best possible image.
102
5. Using On-Screen Menu